%0 Journal Article %J Epilepsy Behav %D 2011 %T Proceedings of the Second International Workshop on Advances in Electrocorticography. %A A L Ritaccio %A Boatman-Reich, Dana %A Peter Brunner %A Cervenka, Mackenzie C %A Cole, Andrew J %A Nathan E. Crone %A Duckrow, Robert %A Korzeniewska, Anna %A Litt, Brian %A Miller, John W %A Moran, D %A Parvizi, Josef %A Viventi, Jonathan %A Williams, Justin C %A Gerwin Schalk %K Brain %K Brain Mapping %K Brain Waves %K Diagnosis, Computer-Assisted %K Electroencephalography %K Epilepsy %K Humans %K United States %K User-Computer Interface %X

The Second International Workshop on Advances in Electrocorticography (ECoG) was convened in San Diego, CA, USA, on November 11-12, 2010. Between this meeting and the inaugural 2009 event, a much clearer picture has been emerging of cortical ECoG physiology and its relationship to local field potentials and single-cell recordings. Innovations in material engineering are advancing the goal of a stable long-term recording interface. Continued evolution of ECoG-driven brain-computer interface technology is determining innovation in neuroprosthetics. Improvements in instrumentation and statistical methodologies continue to elucidate ECoG correlates of normal human function as well as the ictal state. This proceedings document summarizes the current status of this rapidly evolving field.

%B Epilepsy Behav %V 22 %P 641-50 %8 12/2011 %G eng %U http://www.ncbi.nlm.nih.gov/pubmed/22036287 %N 4 %R 10.1016/j.yebeh.2011.09.028 %0 Journal Article %J IEEE Trans Biomed Eng %D 2010 %T A procedure for measuring latencies in brain-computer interfaces. %A Adam J Wilson %A Mellinger, Jürgen %A Gerwin Schalk %A Williams, Justin C %K Brain %K Computer Systems %K Electroencephalography %K Evoked Potentials %K Humans %K Models, Neurological %K Reproducibility of Results %K Signal Processing, Computer-Assisted %K Time Factors %K User-Computer Interface %X

Brain-computer interface (BCI) systems must process neural signals with consistent timing in order to support adequate system performance. Thus, it is important to have the capability to determine whether a particular BCI configuration (i.e., hardware and software) provides adequate timing performance for a particular experiment. This report presents a method of measuring and quantifying different aspects of system timing in several typical BCI experiments across a range of settings, and presents comprehensive measures of expected overall system latency for each experimental configuration.

%B IEEE Trans Biomed Eng %V 57 %P 1785-97 %8 06/2010 %G eng %U http://www.ncbi.nlm.nih.gov/pubmed/20403781 %N 7 %R 10.1109/TBME.2010.2047259 %0 Journal Article %J Epilepsy Behav %D 2009 %T A practical procedure for real-time functional mapping of eloquent cortex using electrocorticographic signals in humans. %A Peter Brunner %A A L Ritaccio %A Lynch, Timothy M %A Emrich, Joseph F %A Adam J Wilson %A Williams, Justin C %A Aarnoutse, Erik J %A Ramsey, Nick F %A Leuthardt, E C %A H Bischof %A Gerwin Schalk %K Adult %K Brain Mapping %K Cerebral Cortex %K Electric Stimulation %K Electrodes, Implanted %K Electroencephalography %K Epilepsy %K Female %K Humans %K Male %K Middle Aged %K Practice Guidelines as Topic %K Signal Processing, Computer-Assisted %K Young Adult %X

Functional mapping of eloquent cortex is often necessary prior to invasive brain surgery, but current techniques that derive this mapping have important limitations. In this article, we demonstrate the first comprehensive evaluation of a rapid, robust, and practical mapping system that uses passive recordings of electrocorticographic signals. This mapping procedure is based on the BCI2000 and SIGFRIED technologies that we have been developing over the past several years. In our study, we evaluated 10 patients with epilepsy from four different institutions and compared the results of our procedure with the results derived using electrical cortical stimulation (ECS) mapping. The results show that our procedure derives a functional motor cortical map in only a few minutes. They also show a substantial concurrence with the results derived using ECS mapping. Specifically, compared with ECS maps, a next-neighbor evaluation showed no false negatives, and only 0.46 and 1.10% false positives for hand and tongue maps, respectively. In summary, we demonstrate the first comprehensive evaluation of a practical and robust mapping procedure that could become a new tool for planning of invasive brain surgeries.

%B Epilepsy Behav %V 15 %P 278-86 %8 07/2009 %G eng %U http://www.ncbi.nlm.nih.gov/pubmed/19366638 %N 3 %R 10.1016/j.yebeh.2009.04.001 %0 Journal Article %J J Vis Exp %D 2009 %T Using an EEG-based brain-computer interface for virtual cursor movement with BCI2000. %A Adam J Wilson %A Gerwin Schalk %A Walton, Léo M %A Williams, Justin C %K Brain %K Calibration %K Electrodes %K Electroencephalography %K Humans %K User-Computer Interface %X

A brain-computer interface (BCI) functions by translating a neural signal, such as the electroencephalogram (EEG), into a signal that can be used to control a computer or other device. The amplitude of the EEG signals in selected frequency bins are measured and translated into a device command, in this case the horizontal and vertical velocity of a computer cursor. First, the EEG electrodes are applied to the user s scalp using a cap to record brain activity. Next, a calibration procedure is used to find the EEG electrodes and features that the user will learn to voluntarily modulate to use the BCI. In humans, the power in the mu (8-12 Hz) and beta (18-28 Hz) frequency bands decrease in amplitude during a real or imagined movement. These changes can be detected in the EEG in real-time, and used to control a BCI ([1],[2]). Therefore, during a screening test, the user is asked to make several different imagined movements with their hands and feet to determine the unique EEG features that change with the imagined movements. The results from this calibration will show the best channels to use, which are configured so that amplitude changes in the mu and beta frequency bands move the cursor either horizontally or vertically. In this experiment, the general purpose BCI system BCI2000 is used to control signal acquisition, signal processing, and feedback to the user [3].

%B J Vis Exp %8 07/2009 %G eng %U http://www.ncbi.nlm.nih.gov/pubmed/19641479 %N 29 %R 10.3791/1319 %0 Journal Article %J IEEE Trans Neural Syst Rehabil Eng %D 2006 %T ECoG factors underlying multimodal control of a brain-computer interface. %A Adam J Wilson %A Felton, Elizabeth A %A Garell, P Charles %A Gerwin Schalk %A Williams, Justin C %K Adult %K Brain Mapping %K Cerebral Cortex %K Communication Aids for Disabled %K Computer Peripherals %K Evoked Potentials %K Female %K Humans %K Imagination %K Male %K Man-Machine Systems %K Neuromuscular Diseases %K Systems Integration %K User-Computer Interface %K Volition %X

Most current brain-computer interface (BCI) systems for humans use electroencephalographic activity recorded from the scalp, and may be limited in many ways. Electrocorticography (ECoG) is believed to be a minimally-invasive alternative to electroencephalogram (EEG) for BCI systems, yielding superior signal characteristics that could allow rapid user training and faster communication rates. In addition, our preliminary results suggest that brain regions other than the sensorimotor cortex, such as auditory cortex, may be trained to control a BCI system using similar methods as those used to train motor regions of the brain. This could prove to be vital for users who have neurological disease, head trauma, or other conditions precluding the use of sensorimotor cortex for BCI control.

%B IEEE Trans Neural Syst Rehabil Eng %V 14 %P 246-50 %8 06/2006 %G eng %U http://www.ncbi.nlm.nih.gov/pubmed/16792305 %N 2 %R 10.1109/TNSRE.2006.875570