04192nas a2200409 4500008004100000022001400041245005900055210005700114260001200171300001100183490000700194520303500201653001403236653001403250653001503264653002703279653001303306653001103319653004003330653003103370653002903401653001103430653002203441653002803463653002203491653001703513653002803530100002803558700001703586700002303603700002503626700001903651700002003670700002403690700002003714856004803734 2010 eng d a1531-824900aBrain-computer interfacing based on cognitive control.0 aBraincomputer interfacing based on cognitive control c06/2010 a809-160 v673 a

OBJECTIVE: 

Brain-computer interfaces (BCIs) translate deliberate intentions and associated changes in brain activity into action, thereby offering patients with severe paralysis an alternative means of communication with and control over their environment. Such systems are not available yet, partly due to the high performance standard that is required. A major challenge in the development of implantable BCIs is to identify cortical regions and related functions that an individual can reliably and consciously manipulate. Research predominantly focuses on the sensorimotor cortex, which can be activated by imagining motor actions. However, because this region may not provide an optimal solution to all patients, other neuronal networks need to be examined. Therefore, we investigated whether the cognitive control network can be used for BCI purposes. We also determined the feasibility of using functional magnetic resonance imaging (fMRI) for noninvasive localization of the cognitive control network.

METHODS: 

Three patients with intractable epilepsy, who were temporarily implanted with subdural grid electrodes for diagnostic purposes, attempted to gain BCI control using the electrocorticographic (ECoG) signal of the left dorsolateral prefrontal cortex (DLPFC).

RESULTS: 

All subjects quickly gained accurate BCI control by modulation of gamma-power of the left DLPFC. Prelocalization of the relevant region was performed with fMRI and was confirmed using the ECoG signals obtained during mental calculation localizer tasks.

INTERPRETATION: 

The results indicate that the cognitive control network is a suitable source of signals for BCI applications. They also demonstrate the feasibility of translating understanding about cognitive networks derived from functional neuroimaging into clinical applications.

10aCognition10aComputers10aElectrodes10aElectroencephalography10aEpilepsy10aHumans10aImage Processing, Computer-Assisted10aMagnetic Resonance Imaging10aNeuropsychological Tests10aOxygen10aPrefrontal Cortex10aPsychomotor Performance10aSpectrum Analysis10aTime Factors10aUser-Computer Interface1 aVansteensel, Mariska, J1 aHermes, Dora1 aAarnoutse, Erik, J1 aBleichner, Martin, G1 aSchalk, Gerwin1 aRijen, Peter, C1 aLeijten, Frans, S S1 aRamsey, Nick, F uhttp://www.ncbi.nlm.nih.gov/pubmed/2051794302198nas a2200229 4500008004100000022001400041245009000055210006900145260001200214520150500226653001001731653001601741653001501757653002701772653001101799653002801810100002001838700001901858700001901877700002401896856004801920 2009 eng d a1940-087X00aUsing an EEG-based brain-computer interface for virtual cursor movement with BCI2000.0 aUsing an EEGbased braincomputer interface for virtual cursor mov c07/20093 a

A brain-computer interface (BCI) functions by translating a neural signal, such as the electroencephalogram (EEG), into a signal that can be used to control a computer or other device. The amplitude of the EEG signals in selected frequency bins are measured and translated into a device command, in this case the horizontal and vertical velocity of a computer cursor. First, the EEG electrodes are applied to the user s scalp using a cap to record brain activity. Next, a calibration procedure is used to find the EEG electrodes and features that the user will learn to voluntarily modulate to use the BCI. In humans, the power in the mu (8-12 Hz) and beta (18-28 Hz) frequency bands decrease in amplitude during a real or imagined movement. These changes can be detected in the EEG in real-time, and used to control a BCI ([1],[2]). Therefore, during a screening test, the user is asked to make several different imagined movements with their hands and feet to determine the unique EEG features that change with the imagined movements. The results from this calibration will show the best channels to use, which are configured so that amplitude changes in the mu and beta frequency bands move the cursor either horizontally or vertically. In this experiment, the general purpose BCI system BCI2000 is used to control signal acquisition, signal processing, and feedback to the user [3].

10aBrain10aCalibration10aElectrodes10aElectroencephalography10aHumans10aUser-Computer Interface1 aWilson, Adam, J1 aSchalk, Gerwin1 aWalton, Léo M1 aWilliams, Justin, C uhttp://www.ncbi.nlm.nih.gov/pubmed/1964147902352nas a2200445 4500008004100000245007200041210006900113260003300182520109300215653001501308653001001323653001501333653003401348653002001382653001801402653002401420653001501444653002701459653002801486653001301514653001101527653001401538653001401552653001101566653000901577653001601586653001701602653002201619653002401641653003401665653001101699653002801710100001901738700002101757700001901778700001701797700002001814700002401834856004801858 2008 eng d00aThree cases of feature correlation in an electrocorticographic BCI.0 aThree cases of feature correlation in an electrocorticographic B aVancouver, BCbIEEEc08/20083 aThree human subjects participated in a closed-loop brain computer interface cursor control experiment mediated by implanted subdural electrocorticographic arrays. The paradigm consisted of several stages: baseline recording, hand and tongue motor tasks as the basis for feature selection, two closed-loop one-dimensional feedback experiments with each of these features, and a two-dimensional feedback experiment using both of the features simultaneously. The two selected features were simple channel and frequency band combinations associated with change during hand and tongue movement. Inter-feature correlation and cross-correlation between features during different epochs of each task were quantified for each stage of the experiment. Our anecdotal, three subject, result suggests that while high correlation between horizontal and vertical control signal can initially preclude successful two-dimensional cursor control, a feedback-based learning strategy can be successfully employed by the subject to overcome this limitation and progressively decorrelate these control signals.10aAdolescent10aAdult10aAlgorithms10aautomated pattern recognition10acontrol systems10adecorrelation10aElectrocardiography10aElectrodes10aElectroencephalography10aevoked motor potentials10aFeedback10aFemale10afrequency10ahospitals10aHumans10aMale10aMiddle Aged10aMotor Cortex10aSignal Processing10aStatistics as Topic10aTask Performance and Analysis10aTongue10aUser-Computer Interface1 aMiller, Kai, J1 aBlakely, Timothy1 aSchalk, Gerwin1 aNijs, Marcel1 aRao, Rajesh, PN1 aOjemann, Jeffrey, G uhttp://www.ncbi.nlm.nih.gov/pubmed/19163918